Ask any facility manager or plumber, and they’ll tell you that identifying and fixing crossflow issues is one of the challenges that costs them significant time and effort on the job.

Some existing systems were never hydraulically calculated. Some were designed around pipe schedules. Some have little or no remaining safety margin. Add a backflow preventer without understanding the available water supply, system demand and device pressure loss, and a system that once appeared adequate may fail to deliver.

Taught by MedGas expert Mark Allen, the workshop provides the 32 hours of training needed to take the ASSE 6060: Medical Gas Systems Designer exam.

During the 2026 ASPE Convention & Expo in Oklahoma City this fall, industry experts will present dynamic technical education sessions designed to increase the skills and career opportunities of attendees.

Have you looked long enough at a job to realize that despite how much pride was put into appearance, it wasn’t going to work well or at all?

Designing a safe domestic hot water system requires balancing the need for high distribution temperatures to prevent Legionella growth with code-compliant temperature controls to eliminate the risk of scalding at the fixture.

Learn how to balance water conservation with infection control by implementing intelligent plumbing design and management strategies in healthcare environments.

Learn how plumbing engineers must balance the conflicting risks of Legionella control and scald prevention by applying ASSE standards to meet the modern professional standard of care.

Registration is open for the 2026 ASPE Convention & Expo, offering education, networking and access to the latest plumbing system design innovations.

ICC is bringing together regulators, designers, builders and operators through its G12 – Data Center Guideline to align best practices and address key building safety issues.