Four Marietta, Georgia hairdressers who have lived together for the past 40 years recently purchased a 3,500-square-foot penthouse on the 17th and 18th floors of Horizon Condominium. Downsizing from their former 10,000-square-foot house, the owners wanted to remodel the penthouse to better fit their needs before moving in.
The penthouse’s original floor plan had four bedrooms and three baths. The laundry room and all three bathrooms needed to be moved to accommodate their lifestyles, which included building closets bigger than normal.
They wanted four-and-a-half bathrooms. So they opted for a solution that added a powder room, moved a shower to enlarge a closet, moved the laundry room to create a large closet, and created an entirely new bathroom off of the guest room that didn’t have its own bathroom attached before.
One of the foursome, Lester Crowell, contacted his connection at Cool Air Mechanical, a local plumbing and HVAC company also in Marietta, and he was subsequently introduced to plumbing manager Danny Glass. Crowell explained his situation and asked Glass if he could recommend any products to create a bathroom without breaking through the concrete.
Options over conventional plumbing
As with most high-rise buildings, reinforcing cables run inside the foot-thick slab on each floor. Conventional plumbing wasn’t an option since digging through a slab risked cutting through a cable and causing structural damage.
A 42-year plumbing industry veteran, Glass has known of Saniflo’s products through much of his career. Once he began researching a solution for Crowell, he contacted Cheryl Lindstrom of LMS Representatives, Saniflo’s rep in Georgia, for more information. Together, they facilitated a solution for Crowell to ensure the project was successful.
According to Glass, in addition to not being able to break through concrete, the building’s blueprints did not provide much visibility into the building’s plumbing situation.
“Not knowing what’s between the walls was a major challenge,” he says. “We followed the blueprints, but they were outdated and weren’t very helpful. It wasn’t until we took down the walls that we could see what we were working with. Then we could work backward and start planning where the plumbing needed to go.”
HOA approval
Cool Air and the homeowners also had to get approval from the homeowners’ association — yet another challenge, due to a flood that occurred on another floor a year earlier. That left the HOA apprehensive about installing a pump system.
“The condo association was very concerned, because we were working on the top floor, moving fixtures around,” Glass explains. “After the flood, they wanted to be reassured they wouldn’t have any problems.”
All three did several walk-throughs of the penthouse and switched up which products would go where, so everything was where they wanted it to be. Then they did a final walk-through with the HOA, the board of directors and building management to secure approval of the renovation plans.
Solution
“We had to work with the architect on where things would go, as well as get feedback from Lester on what fixtures he sought to accomplish his vision for the condo,” Lindstrom adds. “So we went with several different units for the various applications that he wanted.”
The Saniflo products Glass and Lindstrom ultimately decided on were two Sanipacks; a Sanishower and a Sanicom 1. These pumps are ideal for multi-story buildings where it is impossible to break through the concrete slab to install a conventional waste pump.
The Sanipack is a macerating pump system designed for wall-hung toilets that can handle human waste and toilet paper in residential applications. The blade is made of a hardened stainless steel material, eliminating the need for any service or replacement.
The Sanishower is a low-profile, gray-water pump designed to handle drainage from various plumbing fixtures, such as a sink, shower, urinal, etc. Its compact design with multiple inlets makes it suitable for both commercial and residential applications.
The Sanicom 1 is designed to handle a high volume of gray water from various fixtures, such as a washing machine, dishwasher, sink, shower or bathtub. The pump, which handles up to 194-degree water, is designed to withstand hot liquids with highly acidic properties, again making it ideal for commercial and residential applications.
Before any Saniflo products were installed, Lindstrom held a training session at Cool Air for the plumbing team, so they could understand how the products worked.
“It helps to get the product in front of the installers,” she says, “and let them get hands-on with how it works, and explain the installation in person. That way, they feel very comfortable installing it.”
Here’s a breakdown of each Saniflo unit’s application and installation at the penthouse:
Powder room and second floor wet room
• The two Sanipacks were used to add wall-hung toilets to the first-floor powder room and second-floor wet room.
• The depth of the units allows for the pumps to be installed within the wall. Since the reservoir, the macerating pump and the pipes are hidden from view, this type of installation offers the streamlined, contemporary look of a European bathroom, the style Lester was looking for.
• The powder room Sanipack is connected to a toilet and a lavatory, which is also wall-hung. Effluent is pumped 10 feet vertically and 20 feet horizontally through a 1-inch pipe tied into an existing wet stack within the building.
• The wet room Sanipack is connected to a toilet, a pedestal sink and a shower drain. The discharge line from the toilet pumps 15 feet vertically through a 1-inch pipe to the wet stack.
Walk-in shower
• The Sanishower was used to add a walk-in shower to an existing bathroom on the first floor.
• The Sanishower’s compact size is designed to fit comfortably beneath a shower base. But in this particular installation, the Sanishower is inside the bathroom cabinet.
• The Sanishower can provide drainage connection to a second sanitary fixture, usually a sink. But because the former half-bathroom toilet and vanity were already connected to conventional drainage, this drain pump handles only the shower.
• Capable of discharging gray water waste up to 12 feet vertically and 100 feet horizontally, the Sanishower for this application pumps 12 feet vertically through a 1-inch discharge pipe into a wet stack.
Laundry room
• The Sanicom 1 was used to relocate the laundry room to the first floor and add a laundry sink.
• The pump can drain multiple water fixtures simultaneously, discharging gray water up to 25 feet vertically and/or 250 feet horizontally. For this application, it pumps 15 feet horizontally and 25 feet vertically through a 1.5-inch discharge pipe.
• Gray water enters through one of two side inlets before being pumped to the wet stack.
All pumps were tied into existing vents.
End results
After all the discussion and brainstorming sessions, it has been very rewarding for the group to see the spaces come to life.
“I was skeptical at first on how this would all look when it was installed,” Crowell admits. “We had very specific ideas on how we wanted to design the spaces, and I never thought it would come out as a reality. But once everything got installed and the spaces came together as we envisioned, we were very happy with the results.”
Glass adds: “It would have been very expensive to go the conventional plumbing route and nearly impossible because of the commercial-building restrictions. Saniflo products made it affordable, and we were able to make the homeowner’s vision come to life.”
Since the success of the installation, Crowell has been sharing the remodel details with a friend who lives on another floor of the building, and who now plans to use a Saniflo pump to expand his master bathroom.
Glass and his team will be handling that project as well.
Rafael Sanchez is a product specialist with SFA Saniflo. With more than eight years of dedicated service at SFA Saniflo, Sanchez is a highly experienced product specialist who provides exceptional support for both small and large-scale projects.
