Subscribe to our newsletters & stay updated
The Milwaukee Tool M18 Brushless Threaded Rod Cutter is a new dedicated solution for making cuts in the most common sizes of threaded rod. The tool delivers clean, burr-free cuts for threading nuts on by hand. It also has the power to cut through 1/4-inch, 3/8-inch and 1/2-inch mild steel or 1/4-inch and 3/8-inch stainless steel threaded rod in seconds.
The tool features a unique, new-to-world, design with a 1-1/2-inch built-in trim length and one-handed center grip for making uniform, controlled overhead cuts. This also offers users the clearest line of site for the most accurate cuts. Not only is the tool optimized for overhead cutting, but it can also be laid flat on its back for pre-fab cutting. A brushless motor and an M18 REDLITHIUM 2.0Ah Battery allow the tool to deliver over 400 nut-ready cuts per charge, reducing the need to file the threaded rod before applying the nut. The REDLINK electronics allow the tool’s jaw to auto-retract back to home after each cut so users are ready for the next cut right away.
© 2023 All Rights Reserved