The PRO-Fit precision flaring kit for copper and aluminum tubing used in air conditioning and refrigeration work makes easy, quick and reliable flares in the field. It helps prevent potential sidewall splits and leaks associated with traditional flaring tools when forming 45-degree refrigeration tubing flare connections. The kit consists of five bell-shaped, color-coded, size-inscribed flaring bits designed for 1/4, 3/8, 1/2, 5/8 and 3/4-inch tubing. The flaring process requires just seconds to complete using a (minimum) 12V drill or impact driver. The spinning bit forms the tube opening into a flare without splits, burrs, blemishes or uneven edges to cause leaks. The bits are also efficient for flaring short stubs or existing tubing in cramped spaces. A durable, clear plastic carrying case includes an interior foam organizer with cutouts sized to fit each respective bit, and a color instruction sheet mounted under the foam is readable through the bottom of the plastic case bottom. Bits have no-slip, 1/4-inch-diameter hex-shaft for a standard hex chuck. Available to distributors in four-unit cases and and replacement bits are available. The kit is the first offering from the newly-created PRO-Fit brand.